Clean Water Services and its member cities initiated a program to regularly inspect and support maintenance of privately owned water quality facilities. These facilities are constructed to protect precious water resources by removing pollution from stormwater runoff before it enters into local streams and the Tualatin River.
If your property is located in one of the larger member cities (Beaverton, Cornelius, Forest Grove, Hillsboro, Sherwood, Tigard or Tualatin) these cities have developed inspection programs that align with Clean Water Services inspection program and will implement inspections and can be used as a resource. Please contact the appropriate city for any questions you may have about your private water quality facility.
If your property is in an unincorporated portions of Washington County or in a smaller city (Banks, Gaston, Durham, King City or North Plains) contact Clean Water Services with questions.
Learn about maintaining the private water quality facility in your yard (PDF, 992KB), explore information on Green Infrastructure (PDF, 3.8MB) or get resources and tips on our our Clean Water Hero page.
Clean Water Services and member cities implemented the private water quality facilities management program under the District’s Stormwater Management Plan in 2001. The program includes inspection of all stormwater water quality facilities maintained by private property owners, including residential, commercial, and industrial. The overall goal of the program is to educate property owners about how these facilities function and to ensure that facilities are maintained and operated properly. The following resources have been developed to assist property owners.
The Inspection Guide (PDF, 11MB) is a supplement to Clean Water Services' Design and Construction Standards and is to be used in conjunction with the Standards and other applicable regulations and local codes. This guide explains the benefits of Low Impact Development Approach (LIDA), site planning and the design process. It also includes operation and maintenance plans for each type of facility.
Operation and Maintenance Plans
These plans guide owners to the appropriate inspection frequency and recommended maintenance tasks for each type of facility. Go to page 43 of the Inspection Guide (PDF, 11MB). Inspection Log (PDF, 28KB).
The goal of this program is to ensure that private water quality facilities function as intended and to educate property owners that own these facilities on the proper inspection and maintenance practices which will keep the facility functioning properly.
Water quality facilities generally fall into a couple categories, vegetated and structural. Each type of water quality facility is designed to meet standards outlined in Clean Water Services Design and Construction Standards. In general, storm water passes through the vegetated facilities and a variety of different stormwater pollutants and nutrients are filtered by the vegetation. In a structural facility, storm water pollutants are removed through filter media such as perlite. There are also water quality manholes which capture sediments and floatables prior to the discharge into either vegetated or structural water quality facilities.
In accordance with the National Pollutant Discharge Elimination System(NPDES)Permit issued by Oregon Department of Environmental Quality (DEQ), we are required to identify owners of private water quality facilities, develop and implement an inspection program, and develop and distribute educational materials describing the purpose of these water quality facilities and the maintenance techniques for keeping the private water quality facilities functioning.
Clean Water Services will visit your facility at least once every four years to inspect and consult with you about maintenance needed to correct any identified deficiencies. We will also send annual notices to remind you of your obligation to maintain your facility. The District will always attempt to provide notification before entering the property to perform inspections.
As the owner, you are responsible for inspecting your facility annually and performing maintenance to ensure your facility continues to function properly. If you receive a maintenance correction list from Clean Water Services identifying deficiencies with your facility, you must develop a plan to correct the deficiencies.
Clean Water Services will work with each owner to comply with requests to address deficiencies identified during an inspection. The first step is to educate each property owner on the importance of maintenance and how to maintain their facility. The goal is to achieve voluntary compliance. If voluntary compliance cannot be achieved, an escalating enforcement process may be implemented.
Clean Water Services has developed educational material that outlines different maintenance techniques. Every owner of a private water quality facility will receive an information packet that includes material that will provide guidance on how to inspect and maintain their facility. Handouts are provided with examples of approved vegetation that can be planted in vegetated facilities, invasive weed fact sheets that assist in the identification and methods of control, and operation and maintenance plans that provides guidance on how to maintain each type of facility. Clean Water Services also provides a list of Contractors that have completed specialized training on how to perform the necessary maintenance to ensure your facility functions properly. This information is available on our website.
There are a number of reasons why it’s important to maintain your facility. A well-functioning facility will reduce stormwater pollution from entering local waterways and can reduce localized flooding and erosion issues. Vegetated water quality facilities can also be beautiful and add to the aesthetic value of your property if maintained properly. Ultimately these facilities help protect water quality in the Tualatin River Watershed, a natural resource that provides drinking water and recreational opportunities in Washington County.
Inspection Program Manager
Technical Services Specialist 3
Technical Services Specialist 2